Lead both irrigation wicks through the openings in the bottom of the planter.

Place the planter onto the water tank.

Put the stabilizer for the climbing support in the middle of the planter.

Mount the 3 wall hooks to the wall.

Caution: Prior to installation, check the load-bearing capacity of the wall and the suitability of the provided screws and dowels.

Using the included cord, you can achieve a maximum height of 2,500 mm (measured from the floor). Divide the positions of the individual wall hooks accordingly.

• Use the wall hooks as a template and mark the hole positions.
• Pre-drill with a 5mm drill bit.
• Insert the dowels into the wall.
• Screw the wall hooks into the wall with the screws.
• Check the stability.

• Tie a knot at one end of the cord and thread it through the hole in the stabilizer.
• Thread the cord up through all the wall hooks and down on the other side.
• Secure the cord at the designated position on the stabilizer.

Check the positioning.

Fill the planter with 20L of cucumber or vegetable soil.

Plant a cucumber plant in the center under the stabilizer.

Water the soil around your plant from above during the first weeks. Also fill the water tank with approx. 4,5 liters of water.

As soon as the roots reach the water tank, water your plant via the water tank only. Fill up regularly.

Make sure that the shoots of your plant grow along the climbing support.